Hills NVR-CH16 User Manual Download Page 83

Page: 83 / 160

User Manual of Network Video Recorder - User Manual

Check backup result.

Choose the record file in Export interface and click button

to check it.

Note:

The Player player.exe will be exported automatically during record file export.

6.1.3

Backing up by Event Search

Purpose:

Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer) and SATA

writer. Quick Backup and Normal Backup are supported.

Steps:

Enter Export interface.

Menu>Export>Event

Select “Alarm Input” from the dropdown list of Event Type.

Select the alarm input No. and time.

Click

Search

button to enter the Search Result interface.

Note:

Event types contain Alarm Input, Motion and VCA.

Figure 6. 12

Event Search for Backup

Select record files to export.

Clicking

Quick Export

button will export record files of all channels triggered by the selected alarm

input.

Click

Details

button to view detailed information of the record file, e.g. start time, end time, file size, etc.

Export.

Summary of Contents for NVR-CH16

































































































































































Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands

Hills NVR-CH16, User Manual

Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands