Hills NVR-CH16 User Manual Download Page 78

Page: 78 / 160

User Manual of Network Video Recorder - User Manual

Chapter 6

Backup

6.1

Backing up Record Files

6.1.1

Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Choose the channel(s) you want to back up and click

Quick Export

button.

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” will pop up.

Figure 6. 1

Quick Export Interface

Click on the

Export

button to start exporting.

Note:

Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup

devices supported by the NVR.

Figure 6. 2

Quick Export using USB1-1

Summary of Contents for NVR-CH16

































































































































































Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands

Hills NVR-CH16, User Manual

Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands