Hills NVR-CH16 User Manual Download Page 80

Page: 80 / 160

User Manual of Network Video Recorder - User Manual

Figure 6. 4

Result of Normal Video Search for Backup

Export.

Click

Export All

button to export all the recording files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

Note:

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drives or USB HDDs via the device.

Figure 6. 5

Export by Normal Video Search using USB Flash Drive

Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.

Summary of Contents for NVR-CH16

































































































































































Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands

Hills NVR-CH16, User Manual

Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands