User Manual of Network Video Recorder - User Manual
104
Chapter 8
Network Settings
8.1
Configuring General Settings
Purpose:
Network settings must be properly configured before you operate NVR over network.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration>Network
2.
Select the
General
tab.
Figure 8. 1
Network Settings Interface
3.
In the
General Settings
interface, you can configure the following settings: Working Mode, NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can click the checkbox of
DHCP
to automatically obtain an IP address
and other network settings from that server.
Note:
For the models which has the PoE or built-in switch network interfaces, the internal NIC IPv4 address
should be configured for the cameras connecting to the extra network interface of the NVR.
The valid value range of MTU is 500 ~ 9676.
4.
After having configured the general settings, click
Apply
button to save the settings.
