User Manual of Network Video Recorder - User Manual
105
8.2
Configuring Advanced Settings
8.2.1
Configuring PPPoE Settings
Purpose:
Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the
Network Settings
interface.
Menu >Configuration> Network
2.
Select the
PPPoE
tab to enter the PPPoE Settings interface, as shown in Figure 8. 2.
Figure 8. 2
PPPoE Settings Interface
3.
Check the
PPPoE
checkbox to enable this feature.
4.
Enter
User Name
, and
Password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
5.
Click the
Apply
button to save and exit the interface.
6.
After successful settings, the system asks you to reboot the device to enable the new settings, and the PPPoE
dial-up is automatically connected after reboot.
You can go to Menu >Maintenance>System Info >Network interface to view the status of PPPoE connection.
Please refer to
Chapter Viewing System Information
for PPPoE status.
8.2.2
Configuring Extranet Access
Purpose:
If your NVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used
for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the
Extranet Access
tab to enter the DDNS Settings interface, as shown in Figure 8. 3.
