User Manual of Network Video Recorder - User Manual
56
4.8
Configuring Redundant Recording
Purpose:
Enabling redundant recording, which means saving the recording files not only in the R/W HDD but also in the
redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1.
Enter HDD Information interface.
Menu> HDD
Figure 4. 20
HDD General
2.
Select the
HDD
and click
to enter the Local HDD Settings interface.
1)
Set the HDD property to Redundancy.
2)
Click
Apply
to save the settings.
3)
Click
OK
to back to the upper level menu.
Note:
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Redundant. For detailed information, please refer to
Chapter 10.3.1 Setting HDD Property
. There should
be at least another HDD which is in Read/Write status.
3.
Enter the Record setting interface.
Menu> Record> Parameters
1)
Select
Record
tab
.
Figure 4. 21
Record Parameters
2)
Select Camera you want to configure in the drop-down list.
3)
Check the checkbox of
Redundant Record
.
4)
Click
OK
to save settings and back to the upper level menu.
Repeat the above steps for configuring other channels.