Hills NVR-CH16 User Manual Download Page 38

Page: 38 / 160

User Manual of Network Video Recorder - User Manual

3.2

Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.

•

Single Screen

: showing only one screen on the monitor.

•

Multi-screen:

showing multiple screens on the monitor simultaneously.

•

Auto-switch:

the screen is auto switched to the next one. And you must set the dwell time for each screen on

the configuration menu before enabling the auto-switch.

Menu>Configuration>Live View>Dwell Time.

•

Start Recording:

continuous record and motion detection record are supported.

•

Output Mode:

select the output mode to Standard, Bright, Gentle or Vivid.

•

Add IP Camera:

the shortcut to the IP camera management interface.

•

Playback:

playback the recorded videos for current day.

3.2.1

Front Panel Operation on Live View

Table 3. 2

Front Panel Operation in Live View

Functions

Front Panel Operation

Show single screen

Press the corresponding Alphanumeric button. E.g. Press 2 to display only the

screen for channel 2.

Show multi-screen

Press the

PREV/FOCUS-

button.

Manually switch screens

Next screen: right/down direction button.

Previous screen: left/up direction button.

Auto-switch

Press

Enter

button.

Playback

Press

Play

button.

3.2.2

Using the Mouse in Live View

Table 3. 3

Mouse Operation in Live View

Name

Description

Menu

Enter the main menu of the system by right clicking the mouse.

Single Screen

Choose from menu.

Multi-screen

Choose from menu.

Previous Screen arrow

Switch to the previous screen.

Next Screen arrow

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start continuous recording or motion detection recording of all channels.

Add IP Camera

Enter the IP Camera Management interface, and manage the cameras.

Playback

Enter the playback interface and start playing back the video of the selected

channel immediately.

Summary of Contents for NVR-CH16

































































































































































Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands

Hills NVR-CH16, User Manual

Search results

Summary of Contents for NVR-CH16

Reviews:

Related manuals for NVR-CH16

Brands by name

Popular brands