HIKVISION LV-N9600 Series User Manual Download Page 91

Page: 91 / 211

User Manual of LV-N9600 Series NVR

Pressing numerical buttons will switch playback to the corresponding channels during playback process.

Playback by Time

Purpose:

Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel
switch are supported.

Steps:

Enter playback interface.

Menu>Playback

Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar.

Figure 6. 3

Playback Calendar

If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as

Otherwise it is displayed as

Playback Interface

You can use the toolbar in the bottom part of Playback interface to control playing progress, as shown in Figure 6.
4.

Summary of Contents for LV-N9600 Series




















































































































































































































Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands

HIKVISION LV-N9600 Series, User Manual

Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands