HIKVISION LV-N9600 Series User Manual Download Page 61

Page: 61 / 211

User Manual of LV-N9600 Series NVR

Figure 4. 8

PTZ Settings

Choose pattern number in the dropdown list.

Click the Start button and click corresponding buttons in the control panel to move the PTZ camera, and

click the Stop button to stop it.
The movement of the PTZ is recorded as the pattern.

4.2.6

Calling Patterns

Purpose:

Follow the procedure to move the PTZ camera according to the predefined patterns.

Steps:

Click the button PTZ in the lower-right corner of the PTZ setting interface;

Or press the PTZ button on the front panel or click the PTZ Control icon

in the quick setting bar, or

select the PTZ option in the right-click menu to show the PTZ control panel.

Click the

button to show the general settings of the PTZ control.

Figure 4. 9

PTZ Panel - General

Summary of Contents for LV-N9600 Series




















































































































































































































Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands

HIKVISION LV-N9600 Series, User Manual

Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands