HIKVISION LV-N9600 Series, User Manual

Page: 132 / 211

User Manual of LV-N9600 Series NVR
131
The NVR supports the VCA detection alarm ( face detection, vehicle detection, line crossing detection and
intrusion detection, region entrance detection, region exiting detection, loitering detection, people gathering
detection, fast moving detection, parking detection, unattended baggage detection, object removal detection,
audio loss exception detection, sudden change of sound intensity detection,
and defocus detection ) sent by IP
camera. The VCA detection must be enabled and configured on the IP camera settings interface first.
l
All VCA detection must be supported by the connected IP camera.
l
Please refer to the User Manual of Network Camera for the detailed instructions for the all VCA detection
types.
9.1
Face Recognition
Steps:
1. Enter the Face Detection settings interface.
Menu> Camera> VCA
2. Check the checkbox of Enable Face Recognition.
3. Click Save to save the settings.
Figure 9. 1
Face Recognition
9.2
Face Detection
Purpose:
Face detection function detects the face appears in the surveillance scene, and some certain actions can be taken
when the alarm is triggered.
Steps:
1. Enter the VCA settings interface.
Menu> Camera> VCA
2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection. Select the
VCA detection type to Face Detection.
3. Check the Enable checkbox to enable this function.
4. Click to enter the face detection settings interface. Configure the trigger channel, arming schedule and
linkage action for the face detection alarm. Please refer to step3~step5 of Chapter Setting Motion Detection
Alarm for detailed instructions.
5. Click the Rule Settings button to set the face detection rules. You can click-and-drag the slider to set the
detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
6. Click Apply to activate the settings.