HIKVISION LV-N9600 Series User Manual Download Page 57

Page: 57 / 211

User Manual of LV-N9600 Series NVR

4.2

Setting PTZ Presets, Patrols & Patterns

Before you start:

Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.

4.2.1

Customizing Presets

Purpose:

Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.

Steps:

Enter the PTZ Control interface.

Menu>Camera>PTZ

Figure 4. 3

PTZ Settings

Use the directional button to wheel the camera to the location where you want to set preset; and the zoom

and focus operations can be recorded in the preset as well.

Enter the preset No. (1~255) in the preset text field, and click the Set button to link the location to the

preset.

Repeat the steps2-3 to save more presets.
You can click the Clear button to clear the location information of the preset, or click the Clear All button to
clear the location information of all the presets.

Summary of Contents for LV-N9600 Series




















































































































































































































Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands

HIKVISION LV-N9600 Series, User Manual

Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands