HIKVISION LV-N9600 Series, User Manual

Page: 134 / 211

User Manual of LV-N9600 Series NVR
133
1) Select the direction to A<->B, A->B or A<-B.
A<->B: Only the arrow on the B side shows; when an object going across the configured line with both
direction can be detected and alarms are triggered.
A->B: Only the object crossing the configured line from the A side to the B side can be detected.
B->A: Only the object crossing the configured line from the B side to the A side can be detected.
2) Click-and-drag the slider to set the detection sensitivity.
Sensitivity: Range [1-100]. The higher the value is, the more easily the detection alarm can be
triggered.
3) Click-OK to save the rule settings and back to the line crossing detection settings interface.
Figure 9. 2
Set Line Crossing Detection Rules
7. Click and set two points in the preview window to draw a virtual line.
You can use the to clear the existing virtual line and re-draw it.
Up to 4 rules can be configured.
Figure 9. 3
Draw Line for Line Crossing Detection