HIKVISION LV-N9600 Series User Manual Download Page 50

Page: 50 / 211

User Manual of LV-N9600 Series NVR

Image Settings icon can be selected to enter the Image Settings menu.

You can set the image parameters like brightness, contrast, saturation and hue according to the actual demand.

Figure 3. 4

Image Settings- Customize

Live View Strategy can be selected to set strategy, including Real-time, Balanced, Fluency.

Face detection function can be used to detect the human faces in live view mode and save in HDD. When

there are human faces with the specified size detected in the front of the camera, the device will capture the
human face and save in HDD.

Move the mouse onto the icon to show the real-time stream information, including the frame rate, bitrate,

resolution and stream type.

Figure 3. 5

Information

Summary of Contents for LV-N9600 Series




















































































































































































































Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands

HIKVISION LV-N9600 Series, User Manual

Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands