HIKVISION LV-N9600 Series, User Manual

Page: 197 / 211

User Manual of LV-N9600 Series NVR
196
3. Enter the information for new user, including User Name, Password, Confirm, Level and User’s MAC
Address.
Password: Set the password for the user account.
STRONG PASSWORD RECOMMENDED –We highly recommend you create a strong password of your
own choosing (Using a minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of
your product. And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown.
Figure 15. 6
Added User Listed in User Management Interface
5. Select the user from the list and then click the button to enter the Permission settings interface, as
shown.