HIKVISION LV-N9600 Series User Manual Download Page 126

Page: 126 / 211

User Manual of LV-N9600 Series NVR

125

8.5

Handling Exceptions Alarm

Purpose:

Exception settings refer to the handling action of various exceptions, e.g.

•

HDD Full: The HDD is full.

•

HDD Error: Writing HDD error or unformatted HDD.

•

Network Disconnected: Disconnected network cable.

•

IP Conflicted: Duplicated IP address.

•

Illegal Login: Incorrect user ID or password.

•

Record/Capture Exception: No space for saving recorded files or captured images.

•

Hot Spare Exception: Disconnected with the working device.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.
Menu> Configuration> Exceptions
Please refer to

Chapter Setting Alarm Response Actions

for detailed alarm response actions.

Figure 8. 12

Exceptions Setup Interface

Summary of Contents for LV-N9600 Series




















































































































































































































Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands

HIKVISION LV-N9600 Series, User Manual

Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands