HIKVISION LV-N9600 Series User Manual Download Page 146

Page: 146 / 211

User Manual of LV-N9600 Series NVR

145

Click Export to export all pictures to the storage device.

10.3

Plate Search

Purpose:

You can search and view the matched captured vehicle plate picture and related information according

to the plate searching conditions including the start time/end time, country and plate No..

Steps:

Enter the Plate Search interface.

Menu>VCA Search> Plate Search

Select the camera (s) for the plate search.

Specify the start time and end time for searching the matched plate pictures.

Figure 10. 3

Plate Search

Select the country from the drop-down list for searching the location of the vehicle plate.

Input the plate No. in the field for search.

Click Search to start searching. The search results of detected vehicle plate pictures are displayed in list or

in chart.

Please refer to the Step7-Step8 of

Section Face Search

for the operation of the search results.

10.4

People Counting

Purpose:

Summary of Contents for LV-N9600 Series




















































































































































































































Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands

HIKVISION LV-N9600 Series, User Manual

Search results

Summary of Contents for LV-N9600 Series

Reviews:

Brands by name

Popular brands