HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 19 | Manualshive

Page: 19 / 73

HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 19

3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters.

Refer to Set Violation and Incident Detection for details.

4. Set continuous capture parameters. Refer to Set Continuous Capture Parameters for details.
5. Set scene and mode parameters. Refer to Set Scene Mode for details.
6. Set the lane parameters. Refer to Set Linked Lane Parameters for details.
7. Optional: Set violation recording parameters. Refer to Set Violation Recording Parameters for

details.

8. Set speed limit parameters. Refer to Set Lane Speed Limit Parameters for details.
9. Link supplement light(s) to the specific lane(s). Refer to Set Supplement Light Linkage for details.
10. Set radar parameters. Refer to Set Radar Parameters for details.
11. Optional: Check the other lane(s) to copy the same settings.
12. Draw lane lines.

1) Click Draw Lane Line.

2) Set the property of the lane lines.

3) Select the default lane lines, right border line, and trigger line, and drag the two end points

of the line or drag the whole line to adjust its position according to the actual scene.

4) Click OK.

Network Traffic Camera Configuration Manual

11

«
...
17
18
19
20
21
...
»

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments