manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 37 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 37

Select the connected radar type.

Linkage RS-485 No.

Select the connected RS-485 port No. of the radar.

Radar Efficient Time

If the duration from the time that the radar sends the detected vehicle speed to the device to

the time that the device captures the vehicle locates in the efficient time, then the radar

detected speed is valid. If not, it is invalid.

Linearity Correction

Adjust the radar output result according to the actual speed.

Constant Correction

The constant correction is to improve the accuracy of the detection speed. It is the extra

added/minus speed value.

Note

The final speed is calculated according to the radar output speed, the linearity correction, and

constant correction together. E.g., the detected speed is 80 km/h, and you set the linearity

correction as 1.2, and the constant correction as 5, then the final speed is 80 km/h × 1.2 + 5 =

101 km/h. And if you do not want to make any change to the detected speed, you can set the

linearity correction as 1, and the constant correction as 0.

4. Click Save.

1.5.7 Set Violation Recording Parameters

You can enable violation recording and set the parameters.
Steps

Note

●

Not all the application modes support violation recording.

●

The violation recording parameters vary with different models. The actual device prevails.

1. Go to Configuration → Capture → Application Mode .
2. Select Trigger Mode.
3. Enable Violation Recording.
4. Set the violation recording parameters.

Recording Start Time

Select the number of captured picture(s). Record will start after the set number of picture(s)

captured.

Pre-record Time

The time before the violation recording starts.

Network Traffic Camera Configuration Manual

29

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments