manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 55 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 55

5) Optional: Select Light Shape.

6) Optional: Set Yellow Light Delay Time.

5. Set traffic light enhancement parameters according to the actual needs.

Note

Keep default settings if the device supports smart traffic light enhancement mode.

Correction Level

You can set different correction levels for different periods. The higher the value is, the

brighter the traffic image color will be.

Detection Sensitivity

It is recommended to adjust by 5 once. This function is valid during daytime. The higher the

value is, the less enhancement exception is.

Extended Pixel

It is recommended to adjust by 5 once. The higher the value is, the clearer the enhanced area

is.

Halo Suppression Level

It is recommended to adjust by 10 once. This function is valid during night. The higher the

value is, the lighter the halo is.

Exposure Level

The higher the exposure level is, the brighter the image is.

Extended Pixel of Mask

It is recommended to adjust by 1 once. The higher the value is, the less possibility to get

exceptional image edges of the traffic lights. However, the traffic lights will be easily

enhanced.

6. Click Save.

Set Traffic Light Synchronization

If you want to synchronize the shutter with the traffic light, enable the traffic light synchronization.
Steps

Note

The function varies with different models. The actual device prevails.

1. Go to Configuration → Video → Camera Parameter → Power Synchronization .
2. Check Power Synchronization.

Network Traffic Camera Configuration Manual

47

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments