Violation Detection
Type
Description
●
Distance to Stop Line: The offset pixel of the second captured
picture of the vehicle running the red light to the stop line.
●
Offset for Third Capture: The min. offset pixel of the third captured
picture of the vehicle running the red light to the second captured
picture. It is recommended to remain the default value.
●
Enabling Red Light Delay Frame: Due to the gotten traffic light
status is not consistent with the actual status, the vehicles running
when the light is yellow may be captured as running the red light.
Set the delay frame, then the captured pictures of running the red
light during the set frame will be regarded as invalid.
U-Turn
The motor vehicle makes a U-turn at the intersection where U-turn or
left turn is forbidden.
Yellow Box Junction
Violation
The motor vehicle stops at the positions where parking is forbidden.
Check it and set the parameters. When the vehicle parks at the lane,
and the parking duration exceeds the set Dwell Time, capture will be
triggered. When the congestion caused by the illegal parking exceeds
the set Congestion Threshold, the lane is regarded as congested.
Failing to Yield for
Pedestrians
The motor vehicle does not yield for the pedestrians or let them go
first. Check it to enable the violation capture of not yielding to
pedestrian. Click Draw Lane Line to adjust the upper and lower border
of triggering lines of not yielding to pedestrian. Set the corresponding
parameters.
●
No Displacement Capture of Pedestrian: If you check it, when the
pedestrian is standing still and the vehicle is passing by, it is regarded
as not yielding to pedestrian, and capture will be triggered. If you do
not check it, only when the pedestrian is moving and the vehicle is
passing by, it is regarded as not yielding to pedestrian, and capture
will be triggered.
●
Not Yielding to Non-Motor Vehicle Capture: Check it to enable the
violation capture of not yielding to non-motor vehicles.
●
Camera Location: If the camera is installed at the intersection, the
device can judge the intersection condition according to the traffic
light connected via the RS-485 serial port.
●
Sensitivity: The higher the sensitivity is, the more easily the violation
will be captured.
●
Number of Pedestrian Not Yielded to: When the number of
pedestrians not yielded to reaches the set value, capture will be
triggered.
Network Traffic Camera Configuration Manual
23