manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 58 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 58

1.8.1 Set Allowlist and Blocklist

Set allowlist and blocklist if you want to control the passing vehicles at the entrance or exit via the

barrier gate.
Before You Start

●

Connect the barrier gate to the relay output interface of the device.

●

Install the storage card, and ensure the storage status is normal.

Steps
1. Go to Configuration → Capture → Entrance and Exit → Allowlist and Blocklist .
2. Add an allowlist or blocklist.

1) Click Add.

2) Set License Plate Number and Card No., and select the list type.

3) Optional: If you want to control allowlist vehicles during fixed time period, enable Time

Settings, and set the effective start time and end time.

4) Click OK.

Note

Wait for 15 minutes to let the added allowlist or blocklist write into the storage. Do not reboot

the device during the process.

The information of the added vehicles in the allowlist or blocklist will be listed below.

Figure 1-29 Set Allowlist and Blocklist

3. You can search, modify, delete, import, or export the allowlist and blocklist.

Search

Select the search type, or enter the keywords. Click Search. The searched vehicle

information will be listed below.

Modify Select an item from the list, and click   . Modify the information, and click OK.

Network Traffic Camera Configuration Manual

50

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments