manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 57 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 57

1.7.9 Set Image Encoding Parameters

If the captured pictures are not clear, set the resolution of the captured pictures and the picture

size.
Steps
1. Go to Configuration → Capture → Capture Parameters → Picture Encoding and Composition →

Image Encoding .

Figure 1-28 Set Image Encoding Parameters

2. Select Capture Resolution.
3. Enter the picture size.

JPEG Picture Size

The size of the compressed captured picture. The actual size is related to the scene

complexity.

Composite Picture Size

The size of the compressed composite picture. The actual size is related to the scene

complexity.

Note

Only the device supporting picture composition supports composite picture size settings. The

actual device prevails.

Picture EXIF Format Transmission

The captured pictures will be transmitted in the EXIF format.

4. Click Save.

1.8 Set Barrier Gate Linkage

If a barrier gate has been connected to the device, you can link barrier gate to realize the control

and management of the vehicles at the entrance or exit.

Note

Only the device supporting license plate recognition system supports barrier gate linkage. The

actual device prevails.

Network Traffic Camera Configuration Manual

49

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments