manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 52 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 52

Check it when you need to detect the passenger's face picture.

●

Check Face Picture Matting of Violation Picture to detect the passenger's face in the

violation picture.

●

Check Check out Front Passenger Forcedly to mat the front passenger's picture no

matter there is someone in the seat or not.

Non-Motor Vehicle User's Face Picture Matting

Check it when you need to detect the non-motor vehicle user's face picture.

Overlay Frame on Matting

Check it to overlay frame on the matted picture.

Face Close-up Picture Cutting Ratio

Select the cutting ratio of the face close-up picture to be small, middle, or large.

Face Close-up Picture Ratio

Adjust the zooming ratio of the face close-up picture.

Matting Contrast Enhancement

Check it to enable the function and set the level. The higher the level is, the stronger the

contrast between the matting and the overlaid picture will be.

Close-up Picture Output Mode

Overlay on Picture

The driver's face close-up picture will be overlaid on the upper right corner of the picture,

and the passenger's face close-up picture will be overlaid on the upper left corner of the

picture.

Upload Arm

The face close-up pictures will be uploaded to the arming host or listening host.

Overlay and Upload Arm

The face close-up pictures will both be overlaid on the pictures and uploaded to the

arming host or listening host.

4. Click Save.
Result
If level 1 arming is set for the camera, the face close-up pictures will be uploaded to the level 1

arming device. If only level 2 arming is set for the camera, the face close-up pictures will both be

stored in the local storage and uploaded to the level 2 arming device.

1.7.6 Set Body Picture Matting

Set body picture matting first if you need to upload body and vehicle pictures to the platform.

Network Traffic Camera Configuration Manual

44

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments