manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 48 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 48

Note

Enabling composition and outputting close-up independently functions conflict with each other.

You can only enable one.

6. Click Save.

1.7.5 Set Information Overlay

Set Single Picture Overlay

If you want to overlay information on the captured single pictures, set capture overlay.
Steps

Note

The supported parameters vary with different models. The actual device prevails.

1. Go to Configuration → Capture → Capture Parameters → Text Overlay .
2. Select single picture channel.
3. Check Capture Picture Overlay.

Figure 1-20 Set Single Picture Overlay

4. Set the percentage, front size, color, overlay position, etc.

Percentage

It is the percentage that the overlaid information occupies on the picture. For example, if you

set the percentage to 50, the overlaid information in a row will occupy up to half of the image

width, and the excess content will be overlaid from a new line.

Network Traffic Camera Configuration Manual

40

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments