manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 63 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 63

initial position of the target should be approximately 35 m. The target track should

correspond to the actual lane, or the lane No. cannot be corresponded to when the data is

uploaded. Adjust Angle Deviation and Horizontal Deviation to guarantee the vehicle target

is on the corresponding lane.

3) Optional: You can also set the following parameters.

Auto Angle Correction

Enable the function, and the radar will adjust the angle deviation automatically according

to the target track.

Radar Wi-Fi

Check it to enable the radar Wi-Fi.

Speed Detection via Radar and Video

Check it to detect speed via both radar and video.

4) Click Save.

4. Uncheck Debug Mode to detect the vehicle speed.

You can view the captured vehicle information such as the license plate color, license plate

number, speed, and illegal type in real time.

Figure 2-2 Vehicle Detection

2.2 Set Radar Calibration

Calibrate radar after the radar detection parameters are set to display the targets detected by the

radar on the video.
Before You Start

Enable Rules Information in Configuration → Local .

Network Traffic Camera Configuration Manual

55

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments