manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 15 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 15

3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters.

Refer to Set Violation and Incident Detection for details.

4. Set scene and mode parameters. Refer to Set Scene Mode for details.
5. Set the lane parameters. Refer to Set Linked Lane Parameters for details.
6. Set continuous capture parameters. Refer to Set Continuous Capture Parameters for details.
7. Set speed limit parameters. Refer to Set Lane Speed Limit Parameters for details.
8. Link supplement light(s) to the specific lane(s). Refer to Set Supplement Light Linkage for details.
9. Set radar parameters. Refer to Set Radar Parameters for details.
10. Optional: Check the other lane(s) to copy the same settings.
11. Draw lane lines.

1) Click Draw Lane Line.

Note

The system will capture a picture and use it as the background. You can also check Video

Background to use the live view as the background.

2) Select the default lane lines and right border line, and drag the two end points of the line or

drag the whole line to adjust its position according to the actual scene.

3) Click OK.

Network Traffic Camera Configuration Manual

7

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments