manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Configuration Manual, Page: 34 / 73

Share
Download
HIKVISION iDS-TCE500-B/1550 Configuration Manual Download Page 34

4. Click Save.

1.5.4 Set Scene Mode

Set the capture type, capture mode, and speed detection mode for the application mode.
Steps

Note

●

Not all the application modes support scene mode settings.

●

The scene mode parameters vary with different models. The actual device prevails.

1. Go to Configuration → Capture → Application Mode .
2. Select Trigger Mode.
3. Set Capture Type.

Motor Vehicle, Non-Motor Vehicle, and Pedestrian

The motor vehicles, non-motor vehicles, and pedestrians in the scene will be recognized and

captured.

Motor Vehicle

Only the motor vehicles in the scene will be recognized and captured.

Non-Motor Vehicle

Only the non-motor vehicles in the scene will be recognized and captured.

4. Set Capture Mode.

Flash

It adopts the separate exposure, and is applicable to the condition of viewing face pictures

clearly at night.

Note

In flash mode, if you enable driving on the lane and lane change detection, the flash light will

not on, but captures will be triggered normally.

Strobe

It adopts the frame extracting, and the captured pictures share the same exposure

parameters with the video image. It is applicable to the condition of capturing license plates

only.

5. Set Speed Detection Mode.

Radar

Speed detection via radar.

Video

Speed detection via video. Click Calibration to calibrate speed via video. Refer to Calibrate

Speed via Video for details.

Network Traffic Camera Configuration Manual

26

Summary of Contents for iDS-TCE500-B/1550










































































Reviews:

No comments