Digital Video Recorder User Manual
96
You can copy the same settings to the cameras with the same signal, e.g., the channel No. 1-3
connect to the TVI cameras, and the channel No.4 connects to an analog camera, and then the
settings of channel No. 1 can be only copied to channel 2 and 3.
Figure 5-5
Copy Camera Settings
Step 7
Set encoding parameters for sub-stream.
1)
Select the
Sub-Stream
tab.
Figure 5-6
Sub-Stream Encoding
2)
Select a camera in the camera dropdown list.
3)
Configure the parameters.
4)
Click
Apply
to save the settings.
5)
(Optional) If the parameters can also be used to other cameras, click
Copy
to copy the
settings to other channels.
For DS-7200/7300/7600/8100/9000HUHI-F/N series, when 3 MP signal input is connected,
the resolution of sub-stream does not support QVGA/QCIF. It will adjust to CIF
automatically in this condition.
For DS-7200/7300/7600/8100/9000HUHI-F/N series, when 3 MP signal input is connected,
the frame rate of sub-stream cannot exceed 15 fps.
Step 8
Set parameters for capture.
1)
Select the
Capture
tab.
