Digital Video Recorder User Manual
93
Figure 5-3
Record Parameters
Step 2
Set the parameters for recording.
1)
Select the
Record
tab to configure.
2)
Select a camera from the camera dropdown list.
3)
Configure the following parameters for the
Main Stream
(Continuous)
and the
Main
Stream (Event)
:
Stream Type
: Set the stream type to be Video or Video & Audio.
Resolution
: Set recording resolution.
The DS-7100/7200/7300/8100HQHI-F/N series support up to 1080p lite (960 × 1080)
resultion. The DS-7200/7300/7600/8100/9000HUHI-F/N series support up to 3 MP
resolution.
For DS-7200/7300/7600/8100HUHI-F/N and DS-9000HUHI-F/N series DVR, the default
TVI/CVBS signal input type also supports the auto detection of 3 MP signal.
The DS-9000HUHI-F16/N series DVR supports up to 3 MP encoding resolution of all
channels.
If the configured encoding resolution conflicts with the resolution of the front-end camera,
the encoding parameters will adjust automatically to meet the front-end camera. E.g., if the
resolution of the front-end camera is 720p, then the encoding resolution of the main
stream will adjust to 720p automatically.
The resolution of 960 × 1080 (1080P Lite) is avaiable when the 1080P Lite is enabled in the
Record>Advanced Settings interface (refer to
Chapter5.11 Configuring 1080P Lite
).
Please refer to the
Appendix-Specifications
for the supported resolutions of different
models.
Bitrate Type
: Set the bitrate type to be Variable or Constant.
