Digital Video Recorder User Manual
94
Video Quality
: Set the video quality of recording, with 6 levels configurable.
The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the Main
Stream (Event) of the IP Camera.
Frame Rate
: Set the frame rate of recording.
For DS-7200/7300/7600/8100/9000HUHI-F/N series, when 3 MP signal input is connected, the
frame rate of both the main stream and sub-stream cannot exceed 15 fps.
Max. Bitrate Mode
: Set the mode to General or Custom.
Max Bitrate (Kbps)
: Select or customize the maximum bit rate for recording.
Max. Bitrate Range Recommended
: A recommended max. bit rate range is provided for
reference.
Max. Average Bitrate (Kbps)
: Set the max. average bit rate which refers to the average
amount of data transferred per unit of time.
Video Encoding
: For 7300/8100/9000HUHI-F/N series, you can select H.264 or H.265 for the
IP camera.
When the connected IP camera does not support H.265, only H.264 can be seleted for the video
encoding.
Step 3
Check the checkbox of
Enable H.264+
or
Enable H.265+
to enable this function. Enabling it
helps to ensure the high video quality with a lowered bitrate.
If the connected IP camera supports H.265 and H.265 is enabled,
Enable H.265+
is shown
on the interface instead of
Enable H.264+
.
After enabling the H.264+ or H.265+, the
Bitrate Type
,
Video Quality
,
Max. Bitrate Mode
,
Max. Bitrate(Kbps)
and
Max. Bitrate Range Recommend
are not configurable.
The H.264+ or H.265+ cannot be used with the SVC at the same time.
For the connnected IP camera, the H.264+ or H.265+ should be supported by the camera
and added to the DVR with the HIKVISION protocol.
You should reboot the device to activate the new settings after enabling the H.264+ or
H.265+.
Step 4
Click
More Settings
to configure more parameters.
