Digital Video Recorder User Manual
295
Select “Menu > Playback”, and uncheck the checkbox of unnecessary channels.
Step 3
Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from our company to do the further
process.
No record file found in the device local HDD, and the prompt “No record file
found” pops up when you search the record files.
Possible Reasons:
—
The time setting of system is incorrect.
—
The search condition is incorrect.
—
The HDD is error or not detected.
Step 1
Verify the system time setting is correct.
Select “Menu > Configuration > General > General”, and verify the “System
Time” is correct.
Step 2
Verify the search condition is correct.
Select “Playback”, and verify the channel and time are correct.
Step 3
Verify the HDD status is normal.
Select “Menu > HDD > General” to view the HDD status, and verify the HDD is
detected and can be read and written normally.
Step 4
Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from our company to do the further
process.
18.4 Summary of Changes
18.4.1
Version 3.4.65
Added:
Add the new model: DS-9000HUHI-F16/N. (Chapter 1.1 Front Panel, Chapter 1.5
Rear Panel, Chapter 18.1 Specifications)
Add picture capture, playback and backup of captured pictures. (Chapter 5
Recording and Capture Settings, Chapter 6.1.9 Playing Back Pictures, Chapter
7.1.1 Backing up by Normal Video Search/Picture Search)
