HIKVISION DS-7208HUHI-K1S User Manual Download Page 113

Page: 113 / 302

Digital Video Recorder User Manual

112

Click

Apply

to save settings.

After you have configured the HDD groups, you can configure the Recording settings following the
procedure provided in

Chapter 5.2-5.7

5.10 Files Protection

Purpose

You can lock the recorded files or set the HDD property to Read-only to protect the record files
from being overwritten.

Protect file by locking the record files

Step 1

Enter

Export Settings

interface.

Menu> Export

Figure 5-31

Export

Step 2

Select the channels you want to investigate by checking the checkbox to

Step 3

Configure the record mode, record type, file type, start time and end time.

Step 4

Click

Search

to show the results.

Summary of Contents for DS-7208HUHI-K1S















































































































































































































































































































Search results

Summary of Contents for DS-7208HUHI-K1S

Reviews:

Related manuals for DS-7208HUHI-K1S

Brands by name

Popular brands

HIKVISION DS-7208HUHI-K1S, User Manual

Search results

Summary of Contents for DS-7208HUHI-K1S

Reviews:

Related manuals for DS-7208HUHI-K1S

Brands by name

Popular brands