WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
1
Chapter 1 Configuration Preparation
1.1 HTTP Configuration
Switch configuration can be conducted not only through command lines and SNMP but
also through Web browser. The switches support the HTTP configuration, the abnormal
packet timeout configuration, and so on.
1.1.1 Choosing the Prompt Language
Up to now, switches support two languages, that is, English and Chinese, and the two
languages can be switched over through the following command.
Command
Purpose
[no] ip http language { english} Sets the prompt language of Web
configuration to English.
1.1.2 Logging into the Switch
1.1.2.1 Via Web Browser
1. Connect computer to a switch console port with a serial cable.
2. Use a telnet client (e.g., PuTTY) to insert the required commands.
1) Log in via config mode.
2) Create a local account with the following credentials.
-
User Name: admin
-
Password: admin
NOTE:
For help, use the “?” command.
3) Open http service.
All manuals and user guides at all-guides.com