WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
15
Chapter 4 Configuration of the Physical
Interface
4.1 Configuring Port Description
Click
Port Config -> Port Description
in the navigation bar, the Port description
Configuration page appears, as shown in the following figure.
You can modify the port description on this page and enter up to 120 characters. The
description of the VLAN port cannot be set at present.
4.2 Configuring the Attributes of the Port
Click Port Config
-> Port Config ->
Port attribute Config in the navigation bar, the Port
Attribute Configuration page appears, as shown in the following figure.
You can change the status, speed, duplex mode and flow control of a port on this page.
After the speed or duplex mode of a port is modified, the link state of the port may be
switched over and the network communication may be impaired.
4.3 Rate Limit
Click
Port Config -> Rate Limit
in the navigation bar, the Port rate limit page appears, as
shown in figure 4.
On this page you can set the reception speed and transmission speed of a port. By default,
all ports have no speed limited. The reception speed and transmission speed are
configured by a percentage or by the designated unit of the switch.
All manuals and user guides at all-guides.com