WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
28
5.7 LLDP Configuration
5.7.1 Configuring the Global Attributes of LLDP
If you click
Layer-2 Config -> LLDP Config
in the navigation bar, the Global LLDP Config
page appears, as shown in the following.
You can choose to enable LLDP or disable it. When you choose to disable LLDP, you
cannot configure LLDP.
The “HoldTime” parameter refers to the ttl value of the packet that is transmitted by LLDP,
whose default value is 120s.
The “Reinit” parameter refers to the delay of successive packet transmission of LLDP,
whose default value is 2s.
5.7.2 Configuring the Attributes of the LLDP Port
If you click
Layer-2 Config -> LLDP Config-> LLDP Port Config
in the navigation bar, the
Setting the attributes of the LLDP port page appears, as shown in the following figure.
All manuals and user guides at all-guides.com