WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
6
Command
Purpose
ip http web max-vlan
{
max-vlan
}
Sets the maximum number of VLAN
entries displayed in a web page.
1.1.7 Setting the Maximum Number of Multicast Entries
Displayed on a Web Page
A switch supports at most 100 multicast entries. You can run the following command to
set the maximum number of multicast entries and Web then shows these multicast
entries. The default maximum number of multicast entries is 15.
Command
Purpose
ip http web igmp-groups
{
igmp-groups
}
Sets the maximum number of multicast
entries displayed in a web page.
1.2 HTTPS Configuration
In order to improve the security of communications, switches support not only the HTTP
protocol but also the HTTPS protocol. HTTPS is a security-purposed HTTP channel and it is
added to the SSL layer under HTTP.
1.2.1 Setting the HTTP Access Mode
You can run the following command to set the access mode to HTTPS.
Command
Purpose
ip http ssl-access enable
Setting the HTTPS access mode
1.2.2 Setting the HTTPS Port
As the HTTP port, HTTPS has its default service port, port 443, and you also can run the
following command to change its service port. It is recommended to use those ports
following port 1024 so as to avoid collision with other protocols’ ports.
Parameters
Notes:
ip http secure-port
{
portNumber
}
Sets the HTTPS port.
All manuals and user guides at all-guides.com