WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
24
The root STP configuration information and the STP port’s status are only-read.
Click the dropdown box on the right side of “Protocol” to change the currently running
STP mode. The supported modes include STP, RSTP and Disabled STP.
The priority and the time need be configured for different modes.
The change of the STP mode may lead to the interruption of the network.
5.3.2 Configuring the Attributes of the STP Port
If you click the "Configure RSTP Port" option, the “Configure RSTP Port” page appears.
The configuration of the attributes of the port is irrelative of the global STP mode. For
example, if the protocol status is set to “Disable” and the STP mode is also changed, the
port will not run the protocol in the new mode.
The default value of the path cost of the port is 0, meaning the path cost is automatically
calculated according to the speed of the port. If you want to change the path cost, please
enter another value.
5.4 IGMP-Snooping Configuration
5.4.1 IGMP-Snooping Configuration
Click
L2 Config -> IGMP Snooping
in the navigation bar, and enter the IGMP-Snooping
Configuration page.
All manuals and user guides at all-guides.com
all-guides.com