WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
35
You can set the size of the maximum transmission unit (MTU).
5.14 PDP Configuration
5.14.1 Configuring the Global Attributes of PDP
Click
Layer-2 Config -> PDP Config
in the navigation bar, the Global PDP Config page
appears, as shown in the following figure.
You can choose to enable PDP or disable it. When you choose to disable PDP, you cannot
configure PDP.
The “HoldTime” parameter means the time to be saved before the router discards the
received information if other PDP packets are not received.
5.14.2 Configuring the Attributes of the PDP Port
Click
Layer-2 Config -> PDP Config-> PDP Port Config
in the navigation bar, the Setting the
attributes of the PDP port page appears, as shown in figure 5.
After the PDP port is configured, you can enable or disable PDP on this port.
All manuals and user guides at all-guides.com