WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
30
An aggregation group is selectable when it is created but is not selectable when it is
modified.
When a member port exists on the aggregation port, you can choose the aggregation
mode to be Static, LACP Active or LACP Passive.
You can click >> and << to delete and add a member port in the aggregation group.
5.9.2 Configuring Load Balance of Port Aggregation Group
Some models support aggregation group based load balance mode configuration and
some not but can be configured in the global configuration mode.
You can select link aggregation load balance mode and click "Apply" to apply it.
5.10 EAPS Ring Protection Configuration
5.10.1 EAPS Ring List
Step 1
Click Layer-2 Config -> Ring Protection ->EAPS Config, the EAPS Ring Config page
appears.
In the list shows the currently configured EAPS ring, including the status of the ring, the
forwarding status of the port and the status of the link.
Step 2
Click “New” to create a new EAPS ring.
Step 3
Click the “Operate” option to configure the “Time” parameter of the ring.
All manuals and user guides at all-guides.com