WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
17
4.6.2 MAC Binding Configuration
Click
Port Config-> Port Security -> MAC Bind
in the navigation bar, the Configure the
MAC-Binding Info page appears, as shown in the following figure.
Click “Detail” and then you can conduct the binding of the source MAC address for each
physical port. In this way, the MAC address that is allowed to visit the port will be limited.
4.6.3 Setting the Static MAC Filtration Mode
Click
Port Config-> Port Security -> Static MAC Filtration Mode
in the navigation bar, the
Configure the static MAC filtration mode page appears, as shown in the following figure.
On this page you can set the static MAC filtration mode. By default, the static MAC filter is
disabled. Also, the static MAC filter mode cannot be set on ports in trunk mode.
4.6.4 Static MAC Filtration Entries
Click
Port Config-> Port Security -> Static MAC Filtration Entries
in the navigation bar, the
Setting the static MAC filtration entries page appears.
If you click “Detail”, you can conduct the binding of the source MAC address for each
physical port. According to the configured static MAC filtration mode, the MAC address of
a port can be limited, allowed or forbidden to visit.
4.6.5 Setting the Dynamic MAC Filtration Mode
Click
Port Config-> Port Security -> Dynamic MAC Filtration Mode
in the navigation bar,
the Configure the dynamic MAC filtration mode page appears, as shown in the following
figure.
All manuals and user guides at all-guides.com