WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
10
Step 8
Enter the command
write
", to save the current configuration to the configuration
file.
Step 9
Open the WEB browser on the PC that the switch connects,
enter
https://192.168.0.1
on the address bar (192.168.0.1 stands for the
management IP address of the switch)IP address of the switch) and then press the
Enter key. Then the switch can be accessed through the secure links.
2.3 Introduction of Web Interface
The whole Web homepage consists of the top control bar, the navigation bar, the
configuration area and the bottom control bar.
2.3.1 Top Control Bar
Save All
Write the current settings to the configuration file of the
device.
It
is
equivalent
to
the
execution
of
the“write”command
.
The configuration that is made through Web will not be
promptly written to the configuration file after validation.
If you click “Save All”, the unsaved configuration will be
lost after rebooting.
English
The interface will turn into the English version.
Chinese
The interface will turn into the Chinese version.
Logout
Exit from the current login state.
After you click "logout", you have to enter the username
and the password again if you want to continue the Web
function.
Interface panel
Displays the figure of interface panel
About
Displays the manufacturer information and sets
auto-refresh.
After you configure the device, the result of the previous step will appear on the left side
of the top control bar. If error occurs, please check your configuration and retry it later.
All manuals and user guides at all-guides.com