WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[
选取日期
]
16
4.4 Port Mirror
Click
Port Config-> Port Mirror
in the navigation bar, the Port Mirror Config page appears,
as shown in the following figure.
Click the dropdown list on the right side of "Mirror Port" and select a port to be the
destination port of mirror.
Click a checkbox and select a source port of mirror, that is, a mirrored port.
4.5 Keepalive Detection
Click
Port Config-> Keepalive Detection
in the navigation bar, the Setting the port
loopback detection page appears, as shown in the following figure.
You can set the loopback detection cycle on the Loopback Detection page.
4.6 Port security
4.6.1 IP Binding Configuration
Click
Port Config-> Port Security -> IP Bind
in the navigation bar, the Configure the
IP-Binding Info page appears, as shown in figure 7.
Click “Detail” and then you can conduct the binding of the source IP address for each
physical port. In this way, the IP address that is allowed to visit the port will be limited.
RX
The received packets will be mirrored to the destination
port.
TX
The transmitted packets will be mirrored to a destination
port.
RX & TX
The received and transmitted packets will be mirrored
simultaneously.
All manuals and user guides at all-guides.com