Highly Reliable SYSTEMS High-Rely NetSwap Page 73 User Manual Download

Page: 73 / 208

3.4.4.2 Jobs

View/Edit the currently defined Replication Jobs.

Name

Illustration 65: Replication Jobs

Job name.

Type

Type of Replication Job.

I/O

Replication Job direction, 'In' or 'Out'.

Status

Status of the Replication Job. Options are 'Ready' if the job is ready and scheduled to run,
'Running' if the job is currently running, and 'Disabled' if the schedule for the job has been
disabled.

Last Result

Result of last run. Options are 'Success' if the job ran successfully, 'Failure' if the job failed, and
'Canceled' if the job was canceled.

Action Buttons

Start

Start (run) the selected job(s) immediately.

Stop

Stop the selected job(s) immediately.

New

Create a new Replication Job.

Delete

Delete the selected job(s). Running jobs cannot be deleted.

Summary of Contents for High-Rely NetSwap












































































































































































































Search results

Summary of Contents for High-Rely NetSwap

Reviews:

Related manuals for High-Rely NetSwap

Brands by name

Popular brands

Highly Reliable SYSTEMS High-Rely NetSwap, User Manual

Search results

Summary of Contents for High-Rely NetSwap

Reviews:

Related manuals for High-Rely NetSwap

Brands by name

Popular brands