Highly Reliable SYSTEMS High-Rely NetSwap Page 134 User Manual Download

Page: 134 / 208

134

3.4.10 RAID Properties (NetSwap/RAIDFrame Plus only)

View/edit the RAID properties.

Illustration 110: RAID Properties

RAID Information

Friendly Disk Name

User defined disk name.

UUID

Universally unique identifier assigned to this Mirror.

Array Size

Size of the RAID in GB's (Gigabytes) or TB's (Terabytes) as appropriate.

RAID Level

RAID level for RAID set.

Status

Status of the RAID, either 'Active' or 'Not Active'.

State

Displays the current state of the RAID (e.g. if it is degraded, rebuilding, etc.).

Rebuild

If rebuilding, this will display the status of the rebuild in percent.

Summary of Contents for High-Rely NetSwap












































































































































































































Search results

Summary of Contents for High-Rely NetSwap

Reviews:

Related manuals for High-Rely NetSwap

Brands by name

Popular brands

Highly Reliable SYSTEMS High-Rely NetSwap, User Manual

Search results

Summary of Contents for High-Rely NetSwap

Reviews:

Related manuals for High-Rely NetSwap

Brands by name

Popular brands