Highly Reliable SYSTEMS High-Rely NetSwap, User Manual, Page: 116 / 208

Share

Page: 116 / 208

Highly Reliable SYSTEMS High-Rely NetSwap User Manual Download Page 116

116

Copyright © 2011-2019 by Highly Reliable Systems, Inc. All rights reserved.

Mode

At

DeltaSync Mode. Options are:

•

One Shot

– Run once and stop

•

One Shot Scheduled

– Start sync at the specified time

•

One Shot Manual –

Start when triggered by an Action URL or program (see

Disk Tools)

•

Continuous

– Sync and then continuously keep disks in sync

•

Continuous Scheduled

– Start sync at the specified time and then continuously

keep disks in sync

•

Continuous Manual

– Start when triggered by an Action URL or program (see

Disk Tools) and then keep disks in sync

Scheduled time in HH:MM format (if using scheduled mode).

Snapshot Storage

Disk selected for snapshot storage or None if no snapshot is used.

Safe copy using temporary files

If checked, when copying, copy to a temporary file first and then rename to the
destination file. This prevents incomplete or corrupt files in the case where the sync
terminates unexpectedly. Requires additional disk space on slave disk to store
temporary files.

DeltaSync Destination Disk

If selected, this disk is a DeltaSync destination disk. This disk will be synced to the data on the
specified soruce disk.

Source Disk

Select the source disk for this destination disk (the disk from which to sync data to this
disk).

Action Buttons

Format

Format disk. Only displayed if disk is not shared or part of a Mirror Disk. See below.

Disk Tools

Access the disk tools for this disk. See below.

Identify

Identify disk by blinking disk light. Only displayed if disk is installed.

Share

Share disk if it is installed and has been safely removed. See below.

«
...
114
115
116
117
118
...
»

Summary of Contents for High-Rely NetSwap

















































































































































































































Reviews:

No comments