Highly Reliable SYSTEMS High-Rely NetSwap, User Manual, Page: 171 / 208

Share

Page: 171 / 208

Highly Reliable SYSTEMS High-Rely NetSwap User Manual Download Page 171

171

Copyright © 2011-2019 by Highly Reliable Systems, Inc. All rights reserved.

Sample Replication Job status file:

Name: Job1
ID: 1
Type: NetSwap
Last Result: Failure
Last Run: 05/14/15 09:15:01

All Replication Job status files may be viewed using a web browser using a URL of the form:

http://<NetSwap/RAIDFrame Plus ip>/status/replication

8.1.4 Disk Flag Files

The flag files are simple text files that “flag” or indicate a specific status of a disk or raid.  The name of
a flag file consists of the disk name followed by a '.' and the flag name as follows:  <disk name>.<flag
name>.  The contents of the flag file are simply the flag name itself in lower case.

The disk flags are:

•

installed/notinstalled

– indicates if the disk is installed or not.

•

shared/notshared

– indicates if the disk is shared or not.

•

mounted/notmounted

– indicates if the disk is mounted or not.

•

removed/notremoved

– indicates if the disk has been removed or not.

•

faulty/notfaulty

– indicates if the disk has been marked faulty or not.

•

spacelow/notspacelow

– indicates if the disk is low on space or not.

•

smartna/notsmartna

– indicates if the SMART information is not available or is available

•

smartprefail/notsmartprefail

– indicates if the disk has a SMART PREFAIL condition or not.

•

smartfailing/notsmartfailing

– indicates if the disk has a SMART FAILING condition or not.

•

smartok/notsmartok

– indicates if the disk has a SMART OK condition or not.

•

deltasyncing/notdeltasyncing

– indicates if the disk is currently syncing or not.

•

deltasynced/notdeltasynced

– indicates if the disk is synced or not.

•

deltasyncfailed/notdeltasyncfailed

– indicates if the disk has a DeltaSync failure or not.

•

deltaactivesync/notdeltaactivesync

– indicates if the disk is actively syncing or not.

The RAID flags are:

•

syncing

– indicates the raid is currently syncing or rebuilding.

•

sync0

– indicates the raid is syncing and is less than 25% complete.

•

sync25

– indicates the RAID is syncing and is between 25% and 50% complete.

•

sync50

– indicates the RAID is syncing and is between 50% and 75% complete.

•

sync75

– indicates the RAIDis syncing and is between 75% and 100% complete.

•

synced

– indicates the RAID is synced.

«
...
169
170
171
172
173
...
»

Summary of Contents for High-Rely NetSwap

















































































































































































































Reviews:

No comments