HIAB Hooklift Multilift XR S Series User And Maintenance Manual Download

Page: 81 / 160

4/2018

Hooklift Multilift XR S

User Manual

113175421

XR14S/16S/18S/21S/26S/30S

>>>

Fast lowering option of the tipping device

(XR16S, XR18S, XR21S, XR26S, XR30S only)

You can use the fast container lowering feature to lower the container faster than normal

speed. The speed of the fast lowering is affected by the weight of the empty container and

the temperature of the oil; at cold temperatures the speed decreases.

The fast lowering option of the tipping device is primarily designed for lowering an empty

or lightly loaded container.

A fully loaded container must be lowered with the normal

lowering function.

2GCC: The fast container lowering feature is switched on by pressing the fast lowering

switch and moving the control lever forward.

2GMR ja 2GRC: The fast container lowering feature is switched on by pressing the fast

lowering switch and then the “lower body” switch.

The switches and the lever must be kept in this position throughout the lowering process.

The container will then freely lower down to a predetermined angle, after which the lowering

process will continue at the normal speed. With large tipping angles, the fast lowering speed

can be adjusted via the position of the control lever (2GCC), but with small tipping angles

the control system determines the speed.

The lowering of the container can be interrupted by freeing the switches. The control lever

must be released to the middle position smoothly (not abruptly) (2GCC). If the fast lowering

switch is released, the main cylinder drive will switch to normal lowering.

2GCC

1. Fast speed button

2. Control lever

Buttons 2GMR and 2GRC

Summary of Contents for Hooklift Multilift XR S Series

































































































































































Search results

Summary of Contents for Hooklift Multilift XR S Series

Reviews:

Related manuals for Hooklift Multilift XR S Series

Brands by name

Popular brands

HIAB Hooklift Multilift XR S Series, User And Maintenance Manual

Search results

Summary of Contents for Hooklift Multilift XR S Series

Reviews:

Related manuals for Hooklift Multilift XR S Series

Brands by name

Popular brands