HIAB Hooklift Multilift XR S Series User And Maintenance Manual Download

Page: 36 / 160

4/2018

113175421

XR14S/16S/18S/21S/26S/30S

Hooklift Multilift XR S

User Manual

Possible safety codes in the

display when moving main

cylinders in

Possible safety codes in the

display when moving hook

arm front

SAFETY CODE

DESCRIPTION

NOTE

d002, d003,

d015

BODY LOCKS OPEN

SENSOR (316) IS NOT ACTIVE.

CHECK THE SENSOR AND CABLE.

MAIN CYLINDERS ARE

MOVING IN.

C009, d003,

d015

BODY LOCKS CLOSED

SENSOR (317) IS ACTIVE.

CHECK THE SENSOR AND CABLE.

MAIN CYLINDERS ARE

MOVING IN.

d012

REAR FRAME DOWN

SENSOR (318) IS NOT ACTIVE.

CHECK THE SENSOR AND CABLE.

MAIN CYLINDERS ARE

MOVING IN.

SAFETY CODE

DESCRIPTION

NOTE

C007, d012

REAR FRAME DOWN

SENSOR (318) IS NOT ACTIVE.

CHECK THE SENSOR AND CABLE.

HOOK ARM IS NOT

MOVING FRONT.

C008

MIDDLE FRAME NEARLY DOWN

SENSOR (120) IS NOT ACTIVE.

CHECK THE SENSOR AND CABLE.

HOOK ARM IS MOVING

FRONT.

C009, d001

BODY LOCKS OPEN

SENSOR (316) AND

BODY LOCKS CLOSED

SENSOR (317) ARE BOTH ACTIVE.

CHECK WHY SENSOR 317 IS ACTIVE.

HOOK ARM IS MOVING

FRONT.

d001

BODY LOCKS OPEN

SENSOR (316) IS NOT ACTIVE.

CHECK THE SENSOR AND CABLE.

HOOK ARM IS NOT

MOVING FRONT.

d016

PULL LIMITER

SENSOR (321) IS ACTIVE.

THE CONTAINER IS IN MECHANICAL LOCKS.

HOOK ARM IS NOT

MOVING FRONT.

Summary of Contents for Hooklift Multilift XR S Series

































































































































































Search results

Summary of Contents for Hooklift Multilift XR S Series

Reviews:

Related manuals for Hooklift Multilift XR S Series

Brands by name

Popular brands

HIAB Hooklift Multilift XR S Series, User And Maintenance Manual

Search results

Summary of Contents for Hooklift Multilift XR S Series

Reviews:

Related manuals for Hooklift Multilift XR S Series

Brands by name

Popular brands