Heras HGD230, User Manual

Page: 67 / 146

EN – Translation of the original user manual - 2.1 | 2019 67
Alternatively:
Press the “OPEN” and “CLOSE” buttons on the backplane simultaneously for about
10 seconds. The current position of the gate is now the (new) CLOSED position.
7.3.1 Marker plate
In CLOSED position (gate closed) the slot of the marker plate must be aligned to
the side of the drive unit. If this is not the case, then manually move the gate to
its CLOSED position. On a SafeGlide 2, no marker plate is mounted.
Marker plate
Marker plate
Illustration 37: Marker plate on uGate / iGate and Delta
Attention: If there is a power failure while the gate is being moved, it may
no longer be possible to save the gate position. This is indicated by the fact
that the gate can no longer be moved in automatic mode. You must then also
manually move the gate to its CLOSED position and set the position again.