Heras HGD230, User Manual

Page: 107 / 146

EN – Translation of the original user manual - 2.1 | 2019 107
10 MAINTENANCE INSTRUCTIONS
•
When working on the gate or cleaning it, the power supply to the system
must be switched off and protected from unauthorized switching on.
•
If the gate must be moved manually, first turn the system circuit breaker in
the motor cabinet to the "off" position and protect it from being switched on
(e.g. by locking the cabinet).
10.1
GATE MAINTENANCE
Under normal conditions and with regular maintenance, sliding gates have a life of
at least 200,000 cycles. To ensure that your gate operates safely, reliably and in
compliance with all relevant legislation and laws, we recommend a MINIMUM of
one maintenance check every 12 months or after 30,000 operating cycles,
whichever is the sooner. However, to ensure safety and proper operation of the
gate, more frequent maintenance checks are recommended during the lifetime of
the gate.
Any maintenance work, including repair, replacement, modification and upgrade
MUST be conducted by a Heras trained, qualified, competent and certified
technician using Heras approved tools and spare parts.
Failure to ensure that the gate is used in accordance with User manual provided,
or any faults or damage caused by wilful misuse, will result in any warranty
becoming void.
During maintenance, essential points of the sliding gate must be periodically
checked using an inspection protocol.
•
Correct operation and adjustment.
•
Check all anchor and bolted connections.
•
Check wear of running wheels, guide wheels and the surface on which
they run
•
Check welded joints, damage to coating and zinc
• Check for damage and the operation of safety edges and infrared.
10.2 DRIVE UNIT MAINTENANCE
Only the battery [type CR 2032] for the integrated clock module must be replaced
after 5 years. The battery can be found in a vertical holder over the twist and
selector switch.